Well, guys this is one of the project that never gets old. This was the first thing I did when I started learning about Arduino. An Arduino Line Follower Robot – A Line Follower Robot Using Arduino UNO and IR Sensor, which follows a line without user interaction. A small autonomous robot which will “see”…
Arduino Home Safety Monitor Introduction[AdSense-C] Guys, In this post, I will show you how you can create this Arduino Home Safety Monitor to identify LPG Leakage, temperature rise, ambient light, humidity and pressure of your home, especially the kitchen, and see the data in these interactive dashboards in real time. This will also alert you…
Online PCB Design and Manufacturing As you all know, PCB or Printed Circuit boards are there in every piece of electronics devices in our lives. From mobile phones to satellites that orbit around the earth, these boards with silver lines play a major part in today’s world. But how can we make PCB Online? How to…
Metasploit, packed with most dangerous payloads and exploits is of course a hacker’s must need tool; there is no doubt. It is very easy to scan, create payload, deliver it to the target and there you go.. You got the Shell!! What if you want to take it outside you network? What if you need…
Home Safety Monitoring System – Arduino IoT Project that will monitor your Room’s environmental parameters like temperature, light, humidity and pressure as well as air quality.
Its Halloween Once Again! Today we are going to show you how you can make your own LED pumpkin with just a few materials.
In this Arduino DIY Science Project, I’ll show you how I created a time-keeping glove with just an Arduino, an accelerometer, and some LEDs. You can do this to make things appear to be frozen in time, as well as travel backward and forward in time by simply tilting your hands. Here you can find…
Story In this Arduino IoT project, I will show you how to make a simple DIY Arduino Smart Home System that can control electrical appliances such as lights, fans, gates, etc suing our mobile phone from anywhere around the world. All you need is an Arduino board with network connectivity, some relays, and an android phone. Let’s…
Ubertooth One The Ubertooth One is one of the best and cheap hardware tool you can put your hands online for Bluetooth Low Energy device penetration testing. It is basically an open source development board that works in 2.4 GHz Frequency which is widely used for wireless communication protocols such as WiFi, Zigbee etc. Of…
Hacker Hardware Tools “S in IOT stands for security”. When you look deeper into an IOT device or any embedded device for that matter, what do you see? You see windows of opportunities. Opportunities to modify it. To edit it. To exploit it. To hack it. IOT devices are full of vulnerabilities. In this post you…